Welcome to the KeepItPrinting.com forums! The doctor is IN.

                                                         

Your business can be seen here! Prime spots available!
             

Please consider making a voluntary donation if you find these forums helpful. Thank you.
Home of the Kip Doctor!            REGISTER: In order to register for our forums please send an E mail to kiptech@earthlink.net stating what user                                                               name and password you would like. This is now required due to all the spambots that have been registering.
KeepItPrinting.com Forum Index KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.


E-0321 error

 
Post new topic   Reply to topic    KeepItPrinting.com Forum Index -> KIP 7770 Discussions
View previous topic :: View next topic  
xerox_7
resident


Joined: 01 Jun 2006
Posts: 226
Location: Columbia, Mo

 PostPosted: Thu Dec 07, 2017 3:43 pm    Post subject: E-0321 error Reply with quote Back to top

I am getting an E-0321 error after a couple of prints. The E-03 error in the book refers to the main drive motor, but what is the "21" part of the error?

Does the main drive motor need replacing?

Thank You
Alan
Triangle Blueprints
 
View user's profile Send private message Send e-mail Visit poster's website
awtech
medical school grad


Joined: 06 May 2008
Posts: 95

 PostPosted: Thu Dec 07, 2017 4:40 pm    Post subject: Reply with quote Back to top

If you look in the 7770K manual it refers to this being a transfer error

(E-0321/E-801) Abnormal output of Process 1 Transfer Charger
Cause Checking
order
Checking Result Treatment
Feed Back Signal 1 Check the status of Transfer
Corona Feed Back Signal
(HVTR_FB) in Input Check
(Signal Code: 0061h)
Is the status of Feed Back
Signal H while test print is
taken?
(H = normal / L = abnormal)
Refer to; [8.6 Input Check]
No Check if its load is
leaked or not.
Note: When the test print
is finished, all of these
items go back to H.
 
View user's profile Send private message
KipCody
medical school grad


Joined: 16 Jul 2013
Posts: 58
Location: Knoxville, TN

 PostPosted: Thu Dec 07, 2017 6:45 pm    Post subject: Reply with quote Back to top

I would try swapping out the transfer and separation coronas and make sure everything is clean of debris.
 
View user's profile Send private message Send e-mail Visit poster's website
xerox_7
resident


Joined: 01 Jun 2006
Posts: 226
Location: Columbia, Mo

 PostPosted: Mon Dec 11, 2017 6:11 pm    Post subject: E-0321 fixed Reply with quote Back to top

Thanks to those who posted suggestions. Cleaned everything real good. Still had error. I separated the HV transfer and sep wire from the spiral anand snipped the ty wrap to the frame ant the problem is solved. Current leakage through the wires I guess. Thanks again for the tips.
Alan
Triangle Blueprints
 
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KeepItPrinting.com Forum Index -> KIP 7770 Discussions All times are GMT - 3.5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum