Please consider making a voluntary donation if you find these forums helpful. Thank you.
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to email@example.com stating what user name and password you would like. This is now required due to all the spambots that have been registering.
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
Posted: Tue Feb 02, 2016 10:05 am Post subject: 3000 bad embedded controller?
When the printer is switched on the display has a message "no signal, going to sleep" for a few seconds and then goes blank, at the same time I hear a loud click (I assume that's a 115v relay cutting the power to the display). None of the fans on the embedded controller are moving, but the printer is trying to initialize, I can here the fuser motor running and see the lamps lighting.
I checked the 115v power line to the EC and it is getting power. Any other suggestions would help, thanks.
Joined: 27 May 2008 Posts: 190 Location: Nashua, NH
Posted: Tue Feb 02, 2016 10:35 am Post subject:
You can check the fuse on the board behind the the metal cover to the right of the controller. Also check the power supply on the controller. I've had several of those go bad. Also check the capacitors of the controller. The swell and leak causing the controller to fail. _________________ I'll have a tech give you a call shortly.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum